Removable Corney Keg Thermowell Ok, here’s my latest project… I’ve wanted to put a thermowell into a Corney keg to allow me to use my wireless temp controller to control the temps in my kegerator. So I picked up a couple of keg post adapters from Bobby. I had a spare liquid-out post and a 16″ […]
The “Barney” Brewstand As I’m slowly ramping up my system to 10 gallons, I gave some thought to how to best set everything up. Right now the night before brew day consists of gathering up all of my equipment and moving it to the back yard. This involves a bunch of lifting and carrying, both […]
Leaky eDrometer I bought an eDrometer early on and have used it extensively, along with my Tilt and Hanna digital refractometer. When I went to use it today, it appeared to be leaking. Closer inspection showed the silicone tubing was cracking near the entrance to the device. I went to my trusty computer to see if this was […]
Silver Soldered Pump Heads I have one March and two Chugger Center Input Pumps that have long had tri-clamp connectors screwed on with PTFE tape. I finally got tired of unwinding, cleaning and re-winding the connectors, so I bit the bullet and tried silver soldering the connectors onto the pump head threads. I carefully cleaned the […]
2″ Silver-Soldered Triclamp Port I was getting tired of disassembling my setup every time I wanted to add liquid. I happened to have a 2 inch radiused TC flange from Bobbie of BrewHardware. The flange is made to be silver-soldered to the side of a kettle, and also happens to fit on the keggle that is my […]
